These are mostly commands that I need at various times. This is not meant to be exhaustive.
Collecting Data about APs
————————————————————————————
*** Show data in a stream ***
Disable / Enable
–More– or (q)uit
*** Disable ***
config paging disable
*** Enable ***
config paging enable
————————————————————————————
*** Show all WLANs ***
Show wlan summary
————————————————————————————
*** AP Groups ***
Tells RF Profiles in use
WLAN ID and Interface
Attached APs
*** All AP Groups on a controller ***
show wlan apgroups
*** AP Groups for a particular school ***
Grep include “SCHOOL-HS” “show wlan apgroups”
————————————————————————————
*** FlexConnect Groups ***
Tells FlexConnect Groups in use
Gives a list of AP Eth MACs that belong to a particular FC Group
Tells Native VLAN
WLAN ID and its VLAN ID
*** All FlexConnect Groups on a controller ***
show flexconnect group summary
*** FlexConnect Groups for a particular FC Group ***
show flexconnect group detail SCHOOL-HS-2
*** FlexConnect Groups members only ***
show flexconnect group detail SCHOOL-HS-2 aps
————————————————————————————
*** AP Info – BSSID MAC, Current Channel / Power ***
Tells Info for:
AP Name
BSSID MAC Address
Slot Admin
Operation
Channel
TxPower
(Use 11a or 11b depending on band type)
*** All APs on a controller ***
show advanced 802.11a summary
*** All APs for a school ***
grep include “SCHOOL” “show advanced 802.11a summary”
*** Single AP – MAC or AP Name ***
grep include “04:5f:b9:00:00:00” “show advanced 802.11a summary”
*** Transmit Power Settings ***
show advanced 802.11a txpower
*** Transmit Power Settings – particular AP / school***
grep include “SCHOOL” “show advanced 802.11a txpower”
————————————————————————————
*** AP Info – BSSID MAC, Current Channel / Power ***
Tells Info for
AP Name
Slots
AP Model
Ethernet MAC
Location
Country
IP Address
Clients
DSE Location
*** All APs on a controller ***
show ap summary
*** All APs for a school ***
grep include “SCHOOL” “show ap summary”
————————————————————————————
*** RF Profile information ***
*** Find all the RF Profiles on a controller ***
Tells
RF Profile
Band
Greenfield
Applied
show rf-profile summary
*** Info in a particular RF Profile ***
Tells
AP Groups that use the profile
Radio policy
Min / Max Tx Power
WLAN ID / Max Clients
Trap Threshold
DCA Channel List
show rf-profile details “SCHOOL-RF-A”
————————————————————————————
*** AP Info – NDP Info as the AP sees it ***
*** By band / Change 11a or 11b ***
show ap auto-rf 802.11a “SCHOOL-R707”
————————————————————————————
*** AP Info – CDP / RF Neighbors ***
show ap cdp neighbors detail SCHOOL-R707A
————————————————————————————
*** AP Info – LWAPP Time ***
Grep include “LWAPP” “show ap config 802.11a SCHOOL-R204”
————————————————————————————
*** AP Info – Locate AP by flashing the LED ***
config ap led-state flash 3 “SCHOOL-R106”
————————————————————————————
*** Enable / Disable Radios ***
*** By band / Change 11a or 11b ***
config 802.11b enable “SCHOOL-R106”
————————————————————————————
*** Convert AP to monitor mode ***
*** By band / Change 11a or 11b ***
config ap mode monitor submode wips “SCHOOL-R106”
————————————————————————————
*** Convert AP to FlexConnect member from monitor mode ***
*** Find AP MAC ***
grep include “SCHOOL-R106” “show ap summary”
*** Add AP to FC Group based on floor ***
config flexconnect group SCHOOL-HS ap add 0c:d0:f8:00:00:00
*** Add AP to AP Group ***
config ap group-name SCHOOL-HS SCHOOL-R106
————————————————————————————
*** Turn on Hostname IE Broadcast ***
*** From the Controller GUI ***
WLANs > (select WLAN ID) > Advanced > tick Aironet ID > Apply
————————————————————————————
